10 Best Affordable Table Saw are being loved and sold, many people are interested in giving good reviews for the quality. Statistics from experts and trusted sources to help your family make the best choice below.

The Best Affordable Table Saw In 2022

$110.93
in stock
11 new from $110.93
as of May 14, 2022 8:04 am
Amazon.com
$629.00
in stock
5 new from $629.00
as of May 14, 2022 8:04 am
Amazon.com
$24.52
in stock
6 new from $24.52
as of May 14, 2022 8:04 am
Amazon.com
$339.00
in stock
3 new from $339.00
as of May 14, 2022 8:04 am
Amazon.com
$21.98
in stock
14 new from $21.98
as of May 14, 2022 8:04 am
Amazon.com
$164.00
in stock
13 new from $164.00
as of May 14, 2022 8:04 am
Amazon.com
$39.99
$44.99
in stock
3 used from $33.33
as of May 14, 2022 8:04 am
Amazon.com
Last updated on May 14, 2022 8:04 am

Lis The Best Affordable Table Saw Reviews

WEN 3921 16-Inch Two-Direction Variable Speed Scroll Saw with Work Light

$110.93  in stock
11 new from $110.93
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Unique design accepts blades in two directions (standard and 90 degrees) to allow for infinite ripping capacity
  • Variable speed goes from 400 to 1600 strokes per minute
  • Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts
  • Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position
  • Features a thumb screw blade adapter for tool-free blade changes, a cast iron base, an air pump, a flex light, a dust port, a foot lock clamp, onboard storage, and three blades

Delmar Tools Patented Push Block For Table Saws, Makes Narrow Rip Cuts Safe And Easy, Helps Prevent Kickback

$34.99  in stock
Amazon.com
as of May 14, 2022 8:04 am

Features

  • PATENTED PUSHBLOCK MAKES NARROW RIP CUTS ON THE TABLE SAW SAFER AND EASIER TO CONTROL- Make your table saw rip cuts down to a 1/4" wide smooth, easy, and safe! The Delmar Tools patent pending push block creates an adjustable width tunnel for the table saw blade to pass through under the push block on difficult narrow rip cuts as small as 1/4”. Gain complete control of both side of stock on your rip cuts.Helps reduce kickback while keeping your hands above and away from the saw blade.
  • THE BEST TOOL FOR EFFECTIVELY RIPPING THIN STOCK ON THE TABLE SAW- Unlike cumbersome push sticks and feaher boards, this push block design distributes even and accurate pressure to both sides of the stock for fluid rip cuts. This push block grips both side of the stock and guides it through the table saw cut while safely keeping your fingers and hands out of the way. Eliminates those dangerous close calls with your fingers by the saw blade on narrow rip cuts!
  • USER FRIENDLY ADJUSTMENTS TO SET UP EACH RIP CUT- Adjustable center leg is easily adjusted by rolling a wheel with your thumb to set up different width cuts. Innovative balance wheel is deployed via a button to deliver stability on narrow cuts. No annoying thumbscrews that have to be loosened and tightened for each cut.
  • COMES FULLY ASSEMBLED, NO INSTALLATION NECESSARY- Arrives ready to go right out of the box, no frustrating assembly required. Other push blocks require frustrating installation with tons of moving pieces
  • LIFETIME WARRANTY- Delmar Tools includes a lifetime warranty on this pushblock. Any issues down the line and you will be covered for a free replacement or a refund.

DEWALT 10-Inch Table Saw, 32-1/2-Inch Rip Capacity (DWE7491RS)

$629.00  in stock
5 new from $629.00
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Your purchase includes one Dewalt table saw, 10inch 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches, blade guard assembly manual
  • Other Specs: Max rip to left of blade – 22inch | Max rip to right of blade – 32-1/2inch | Max width of Dado – 13/16inch | Arbor size – 5/8inch | Amps – 15 | Depth of cut at 45inch – 2-1/4inch | Depth of cut at 90° – 3-1/8inch | No Load Speed: 4800 RPM
  • Rolling stand designed for easy set up and breakdown with excellent stability
  • Rack & Pinion Telescoping Fence System Make fence adjustments fast, smooth and accurate
  • Features a 15.0A high torque motor with the power to cut pressure treated lumber and hardwoods

Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS

 in stock
Amazon.com
as of May 14, 2022 8:04 am

Features

  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece

TonGass Dado Throat Plate Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS DWE7492) - Made from Impact-Resistant PC/PBT Blend Material

$21.99  in stock
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Ill-fitting dado throat plates can cause injury and equipment damage. This table saw dado throat plate will fit and lock in place like the stock plate. Also, like the stock plate, this dado throat plate also comes with 4 adjustment screws
  • Please take note that the dado throat plate looks very similar to another throat plate model. Ensure that your table saw model is listed or meets all specifications
  • Compatible with DeWalt 10" Portable Table Saw (DWE7490 DWE7491 DWE7491RS (Type 2) DWE7492 table saw models)
  • And with dimensions of 13 1/2" x 3 11/16" x 7/16", this throat plate is a universal fit for several 10" portable job site/contractor table saws that have dado capabilities. It can support up to an 8-inch diameter stacked dado that is up to 13/16" wide
  • MADE FROM IMPACT-RESISTANT PC/PBT BLEND MATERIAL - This is no flimsy plastic. PC/PBT construction-grade material blends have high impact resistance, dimensional stability, heat resistance, and chemical resistance. Unlike other plastic blends, PC/PBT is rigid, tough, and strong

Bostik 10220 Aerosol Top-Cote

$24.52  in stock
6 new from $24.52
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Prevents rust
  • Table and tool surface sealant
  • Dramatically reduces sliding friction
  • Better than wax
  • Repels dust, dirt, and moisture

SKIL 15 Amp 10 Inch Table Saw with Stand- TS6307-00

$339.00  in stock
3 new from $339.00
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • RACK AND PINION FENCE RAILS - Ensures fence stays parallel to blade for fast smooth, and accurate cuts
  • INTEGRATED FOLDING STAND - Legs quickly fold in to provide portability and convenient storage
  • PARALLEL BLADE ALIGNMENT - Available micro-adjustment of blade so that it is parallel to rip fence and miter slot
  • 4x4 CUTTING CAPACITY - Cuts material up to 4x4 at 90 degrees
  • 2-47° BEVEL CAPACITY - Cuts between 2 positive stops at 0 and 45 degrees with quick release lever

Corona Tools 10-Inch RazorTOOTH Folding Saw | Pruning Saw Designed for Single-Hand Use | Curved Blade Hand Saw | Cuts Branches Up to 6" in Diameter | RS 7265D

$21.98  in stock
14 new from $21.98
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • 3 SIDED RAZOR TEETH FOR EFFICIENT CUTTING: 10" blade is ideal for cutting 5" - 6" diameter, small to medium, branches
  • ERGONOMICALLY DESIGNED, COMFORTABLE, CO-MOLDED HANDLE: Provides a comfortable grip for extended use
  • EASY TO LATCH BLADE PREVENTS INJURY WHEN NOT IN USE: Folding blade is curved, taper-ground, and replaceable
  • IMPULSE HARDENED TEETH FOR LONG SERVICE LIFE: Extends the life of the tool season after season
  • UP TO 6 TEETH PER INCH AND CURVED BLADE DESIGN FOR FASTER CUTTING: Cuts are smoother and quicker than a traditional saw.

DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)

$164.00  in stock
13 new from $164.00
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile stands
  • Heavy-duty kickstand allows the stand to balance upright for mobility and storage
  • Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
  • Wide stand base and offset rear legs provide stability and support for material feed control
  • Folding legs with quick release levers collapse under the stand, minimizing overall size for transport.

WORKPRO Folding Roller Stand Height Adjustable, 250 pound Load Capacity W137006A

$44.99
$39.99
 in stock
3 used from $33.33
Free shipping
Amazon.com
as of May 14, 2022 8:04 am

Features

  • Adjustable Height From 27-In To 43-In
  • Highly Visible Edge Guides Keep Work In Place
  • Eccentric Foot Keeps Stand Stabilized On Uneven Surfaces
  • Portable, Light-Weight Design Folds For Convenient Storage